Basic Info.
Installation Method
Fixed
Cooling Method
Water Cooling
Output Type
AC Three Phase
Speed
1000rpm/ 1200rpm Speed
Usage
Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit
Automation Type
Excitation Mode
Brushless
Control Panel
Intelligent
Starting Mode
Compressed Air
Number of Cylinders
Multi-Cylinder, 6
Applied Area
Wood Gasification Power Plant
Installation
on-Site Installation
Transport Package
Standard Export Packaging
Specification
7651*2260*3927
Product Description
Durable industrial used 300kw wood gas gasifier power generator plant construction
Power range of Durable industrial used 300kw wood gas gasifier power generator plant from 400kW to 1000kW. In-line engine, now there are 6300-type (6-cylinder), 8300 (8-cylinder), 9300 (9-cylinder) three models. Engine bore is 300mm (the biggest in domestic market), piston stroke 380mm, engine speed is 500rpm or 600rpm (the lowest in domestic market).
Technical characteristics
1.Accurate mixture ratio, smooth inlet flow and safe operation, gas mixed before turbocharged and inter-cooler, proportional mixer adopted achieve air-fuel ratio automatic adjustment, explosion-proof flame device installed on inter-cooler pipe and inlet pipe to release the explosion pressure and eliminate risk when tempering or shooting.
2. Matching advanced electronic governor, precisely adjust gas flow achieving real-time control of engine speed.
3. Air-cooled radiator installed in front of engine, achieve closed-loop cooling, ensure cooling effect and reduce cooling water consumption.
4. Oil pre-heater and water pre-heater can be matched, realizing oil and water preheated before starting to ensure start even in cold region.
5. Be equipped with electronic control system, with parameters monitor display and alarm protection function, as well as auto-starting, automatic closing and parallel, tele-measuring, tele-signaling and other automatic function, the unit run more stable, easy to parallel, and simple management.
6. Sound attenuated container gas generator set is highly integrated and modular, achieve mobile power plant, and effectively reduce noise and thermal load on the environment.
Gas requirements
Biomass gas should be subject to appropriate tar cleaning, filter, gas-liquid separation, and pressure regulation. If the temperature is too high, should also be through cooling treatment, and ensure no liquid ingredients in the gas. Gas temperature≤ 40ºC, gas pressure 2.5~10kpa, pressure change rate≤1kPa/min, tar content≤50mg/Nm3, H2S≤50mg/Nm3, NH3≤20mg/Nm3, moisture content≤20mg/Nm3, impurity size≤5μm, impurity content≤30mg/Nm3, calorific value≥4MJ/ Nm3.
| | Specification |
Engine | Type | Z8170D/M |
Style | Inline, water cooled, spark plug ignitation, non-turbocharged |
|
Cylinder number | 8 |
Cylinder diameter (mm) | 170 |
Rated speed(r/min) | 1000 |
Rated power (kW) | 160 |
Rated thermal consumption(MJ/kW·h) | ≤11.0 |
Rotate direction(From flywheel) | Clockwise |
Start mode | Air motor/motor |
Exhaust temperature (ºC) | ≤600 |
Gas pressure(kPa) | ≥2.5 |
Gas temperature(ºC) | ≤40 |
Oil consumption(g/kW·h) | ≤1.0 |
Generator Set | Type | 160GFM |
Rated power(kW) | 160 |
Voltage(V) | 400 |
Current(A) | 288 |
Power factor(COSΦ) | 0.8(Lagging) |
Excitation mode | Brushless |
Phase and connecting | 3-phase 4-wire |
Dimension (L×W×H)(mm) | 4500×1400×2200 |
Weight(kg) | 7600 |
Quality Service
1.Quality control comply with ISO9001 standard, to ensure product performance stipulated in technical documents, and certified by EU CE authorization.
2.Provide on-site installation, commissioning guidance and personnel training represented by competent electromechanical technician.
3.Customers can send staff to us for free training and learning genset work principle, operation and maintenance.
4. Service offices can be established to supply spare parts in time and ensure the quality consistent with machine assembly quality.
5. Full-time liaison officer can be appointed to regularly visit, understand situation and guide to deal with the failure timely .
6. Help customers to build power plant regulations, procedures and operation rules, to achieve safe production and timely maintenance.
Address:
Room 520, Building A, Limin Building, Zhangdian District, Zibo, Shandong
Business Type:
Trading Company
Business Range:
Agriculture & Food, Chemicals, Health & Medicine
Management System Certification:
ISO 9001, BSCI, BRC, SA 8000, HACCP, ISO 13485
Company Introduction:
Zibo Xinda International Trade Co., Ltd, with many export experience, has our our own factory which located in Zibo Technology Industrial Park of Shandong Province. The transportation is very convenient. Our company specializes in manufacturing disposable medical and protective PVC gloves. The sixteen production lines of our company have an annual production capacity of about 2 billion pieces of PVC gloves. Our company has advanced equipment and technology and enjoys an integrated reputation in scientific research, development, production and sale. We have passed ISO9001 system, ISO13485 system, CE international Quality Management System and American FDA System Certifications. PVC plastic disposable gloves produced by our company have stable and reliable quality. Our company wins a high reputation in Europe, Japan and the United States and other developed countries. We always uphold the principle of "Strenuousness makes good achievement, Honesty makes good business. ". We look forward to cooperating with you.